Motorized actuator for direct connection to the European Installation Bus
EMO EIB actuators are used in the EIB building installation system in the heating, ventilation and air conditioning facilities. They are suitable for installing on thermostatic valve bodies and make it possible to achieve optimum control results when used with the appropriate EIB room temperature controller and also for more demanding control accuracy or for difficult control systems. Due to their low power consumption, the actuators receive their voltage supply directly from the bus.
Technical description
The EMO EIB proportional actuator is designed for connection to the European Installation Bus (EIB).
The connection is made directly, a separate bus coupling is not necessary. In addition, there is no need for an external auxiliary voltage supply as the actuator is supplied with voltage from the bus.
Enabling contactless programming of the physical address is made with the aid of the programming magnet. A programming LED acts as a status indicator. The maintenance-free actuator operates at an extremely low noise level. The compact body made of top quality plastic includes the motor, gears, stroke recognition and the entire communications and control electronics.
The EMO EIB design with two binary inputs provides the possibility of integrating additional communication objects (see list of the communication objects).
The EMO EIB is intended for installation on (delete: all HEIMEIER) TBV valves, thermostatic valve bodies and three-way valves. Adapters enable the mounting of thermostatic valve bodies of other manufacturers (delete:, see leaflet EMO T or EMOtec).
The electrical connection is made by means of a 2-wire cable protected against polarity inversion, or, with the two-binary input design, with a 6-wire body-strengthened cable.