Thermostatic mixing valve for domestic hot water
Thermostatic mixing valve for control of domestic hot water systems in apartment blocks with or without hot water circulation. Perfect for systems with circulation pump.
Domestic hot water systems in private houses, blocks of flats, hospitals, old-age and nursing homes, hotels, shower-rooms of sports facilities, industrial and commercial buildings.
The TA-MATIC is intended mainly as a central mixing unit for domestic hot water systems in apartment buildings, in systems with or without hot water circulation.
It works most efficient, if the system is equipped with a circulation pump. In this case, the unit can also be used as a central mixer for shower and bath facilities.
Max. working temperature: 90°C
Each size can be supplied with four standard temperature settings: 25°C, 40°C, 48°C or 55°C.
Factory-set standard temperatures can be adjusted within the limits: 20-30°C, 30-45°C, 36-53°C and 45-65°C.
Valve body: Gunmetal (SS 5204)
Seat: Stainless steel
Expansion medium in the thermostat sensing element are gaseous hydrocarbon, wax and pulverized copper.
DN 20-50: TA-MATIC 3400, JRGumat PN10 and dimension (ex. 32 • 1 ¼).
DN 65-80: TA-MATIC 3410, JRGumat PN10 and dimension.
DN 20-50: Soldering or threaded connections are ordered separately.
DN 65-80: Flanges according to EN 1092-2.
The packaging of the TA-MATIC can be used to provide insulation against heat losses.
The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by TA Hydronics without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.tahydronics.com.